Oxidation is what makes gelcoat look dull and chalky. In South Florida, strong sun, heat and salt air speed it up. The good news: a simple routine keeps your finish shining much longer.
What causes oxidation
UV rays break down the surface of the gelcoat over time. Salt and dirt left on the boat hold moisture against the surface and make it worse. Dark hulls and colored gelcoat usually show oxidation faster than white.
Signs to look for
- A dull, faded look where the hull used to shine
- A chalky residue that rubs off on your hand
- Colors that look washed out or uneven
- Water that no longer beads on the surface
How to prevent it
- Rinse with fresh water after every trip to remove salt.
- Wash regularly with a boat soap (not dish soap, which strips wax).
- Keep a layer of wax or sealant on the gelcoat and renew it every few months.
- Cover the boat or keep it under a roof when you can.
- Address light oxidation early, before it needs heavy compounding.
Already oxidized?
Light oxidation can often be polished out. Heavier oxidation needs compounding before polishing and waxing. Our Tier 2–4 detailing services include a 2-step compound and polish to bring the shine back, and a Bi-Weekly Wash Plan helps keep it that way.
